HYDROPROCESSING OF PETROLEUM FRACTIONS OVER MODIFIED ALUMINIUM OXIDE CATALYSTS

Авторы

  • Tuktin B.T.
  • Shapovalova L.B.
  • Yeleussin K.O.
  • Abilmagzhanov A.Z.
  • Kubasheva A.Zh.

Ключевые слова:

catalyst, straight-run gasoline, diesel oil fraction, zeolite, hydro processing.

Аннотация

The hydro processing of gasoline and diesel oil fractions over aluminum-nickel-molybdenum
catalysts modified by additives HY, ZSM-5, phosphorus and rare earth elements were studied. At the hydro
processing of straight-run gasoline over NiO-MoO3- Ce2О3-Р2О5–ZSM(30%)-Al2O3 the content of isoalkanes
increases in comparison with the initial from 26.3 to 35.7- 38.3% at 320-400о
С. The octane number of refined
gasoline at 400о
С is 83.7 (RON) and 69.7 (MON). The sulfur content decreases from 0.037% (initial gasoline) to
0.0022%.
At hydro processing of straight-run gasoline over NiO-MoO3-La2О3-Р2О5-ZSM-Al2O3 in the range of 320–
400 o
C the content of isoalkanes is 30.7- 44.3%. The octane number of refined gasoline at 400o
C is maximum and is
equal to 91.8 (RON) and 72.4 (MON). Under these conditions the sulfur content decreases from 0.0092% to
0.0028%.
The optimal conditions for the hydro processing of straight-run gasoline were revealed: T=400˚С, V=2 h-1,
Р = 4.0MPa. The catalyst NiO-MoO3-La2О3-Р2О5-ZSM-HY-Al2O3 has the highest hydro desulfurizing activity, the
residual sulfur content at 400o
С is 0.0012%.
The catalyst NiO-MoO3-La2О3-Р2О5-ZSM-Al2O3 has the highest hydro desulfurizing activity. At hydro
processing of straight-run diesel fraction on this catalyst under optimal conditions the sulfur content decreases from
0.6400 % to 0.0740 % and during hydro processing of a straight-run diesel fraction with a higher sulfur content
0.8042% - up to 0.053%, which, apparently, is associated with the presence in the feedstock of various types of
organosulfur compounds. The lowest pour point and cloud point under optimal conditions reaches minus 39.6o
С and
minus 30.5o
С respectively.
Thus, developed modified zeolite-containing catalysts for the hydro processing of gasoline and diesel fractions
carry out hydro processing, hydro isomerization and hydrogenation in one stage. The developed catalysts make
possible to obtain high-octane low-sulfur gasoline and low-solidification low-sulfur diesel fuel.

Загрузки

Опубликован

2020-10-08

Как цитировать

Tuktin B.T., Shapovalova L.B., Yeleussin K.O., Abilmagzhanov A.Z., & Kubasheva A.Zh. (2020). HYDROPROCESSING OF PETROLEUM FRACTIONS OVER MODIFIED ALUMINIUM OXIDE CATALYSTS. Известия НАН РК. Серия химии и технологии, (5), 55–63. извлечено от http://89.250.84.46/chemistry-technology/article/view/508